Basic knowledge of data cable

The data cable is used to connect mobile devices and computers to achieve the purpose of data transmission or communication. In layman's terms, it is a channel tool that connects computers and mobile

14

05

/

2021

About the wire harness factory's testing standards for copper wires

Copper wire is an integral part of the wire harness. The quality of the copper wire is related to the quality of the wire harness. Therefore, the wire harness manufacturer needs to have a testing standard for the copper wire. So what are such standards?

07

04

/

2021

The wiring harness processing factory introduces what are the specific interface types of the connecting line

If a wire harness processing plant is the time for the production of connecting wire manufacturers, people can choose some better methods, referring to the time for this part, flat wires, electronic wires, wires, electronic wires, people will definitely be able to reach through their own methods The effect is very good. When people are planning this aspect, they can also do some relevant understanding, and this approach makes it obvious to many people that the effect is very good, but when buying You must understand the type of interface here. As long as you can achieve good results, you can better understand the problems in this area. As long as this talent makes people feel that it is very good of.

07

04

/

2021

Talking about the simple difference between USB data line 2.0 and 3.0

The difference between USB3.0 and USB2.0 1. Data transfer rate, 3.0 is SuperSpeed ​​5.0Gbps, 2.0 is 1.5Mbps, 12Mbps or 480Mbps 2. Data interface, 3.0 is full-duplex, four-channel differential signal independent of USB 2.0 signal, supports simultaneous two-way data transmission, 2.0 is half-duplex, dual-channel differential signal, one-way data transmission, the total route needs to be negotiated in advance Transmission direction

07

04

/

2021

< 1 >